Oracle® Transparent Gateway for Sybase Administrator's Guide 10g Release 2 (10.2) for IBM AIX Part Number B14284-01 |
|
|
View PDF |
After installing the gateway, perform the following tasks to configure the gateway for Sybase:
Perform the following tasks to configure the Oracle Transparent Gateway for Sybase.
The gateway system identifier (SID) is an alphanumeric character string that identifies a gateway instance. You need one gateway instance, and therefore one gateway SID, for each Sybase database you are accessing. The SID is used as part of the file name for the initialization parameter file. The default SID is tg4sybs.
You can define a gateway SID, but using the default of tg4sybs is easier because you do not need to change the initialization parameter file name. However, if you want to access two Sybase databases, you need two gateway SIDs, one for each instance of the gateway. If you have one Sybase database and want to access it sometimes with one set of gateway parameter settings, and other times with different gateway parameter settings, you can do that by having multiple gateway SIDs for the single Sybase database.
The initialization parameter file must be available when the gateway is started. During installation, the following default initialization parameter file is created:
$ORACLE_HOME/tg4sybs/admin/inittg4sybs.ora
Where $ORACLE_HOME is the directory under which the gateway is installed.
If you are not using tg4sybs as the gateway SID, you must rename the initialization parameter file using the SID you chose in Task 1. This default initialization parameter file is sufficient for starting the gateway, verifying a successful installation, and running the demonstration scripts.
In the initialization parameter file, specify the Sybase connection as follows:
HS_FDS_CONNECT_INFO=server_name.database_name[,INTERFACE=interface_file]
The entries for both the server_name and database_name are case-sensitive. The entry for the interface_file includes the full path and name of the file.
Additionally, set the Sybase environment variable, as follows:
Set SYBASE=sybase
Where sybase is the directory referred to in the $SYBASE environment variable (the home of the Sybase software installation).
A number of initialization parameters can be used to modify gateway behavior. You might want to change the initialization parameter file later to meet system requirements.
See Also:
Appendix D, "Heterogeneous Services Initialization Parameters" and the Oracle Database Heterogeneous Connectivity Administrator's Guide for more information about customizing the initialization parameter file.The gateway requires Oracle Net Services to provide transparent data access. After configuring the gateway, configure Oracle Net Services to work with the gateway.
Oracle Net Services uses the TNS listener to receive incoming connections from a Oracle Net Services client. The TNS listener and the gateway must reside on the same machine.
The TNS listener listens for incoming requests from the Oracle database server. For the TNS listener to listen for the gateway, information about the gateway must be added to the TNS listener configuration file, listener.ora
. This file is located in $ORACLE_HOME/network/admin
, where $ORACLE_HOME is the directory under which the gateway is installed.
Note:
If Oracle Net Services is reinstalled, the originallistener.ora
file is renamed and a new listener.ora
file is put into the $ORACLE_HOME/network/admin
directory.The following entries must be added to the listener.ora
file:
A list of Oracle Net Services addresses on which the TNS listener listens
The gateway that the TNS listener starts in response to incoming connection requests
The Oracle database server accesses the gateway using Oracle Net Services and the TCP/IP protocol adapter. The following is the syntax of the connect descriptor entry in the listener.ora
file:
LISTENER= (ADDRESS= (PROTOCOL=TCP) (HOST=host_name) (PORT=port_number))
Where:
Variable | Description |
---|---|
host_name | is the name of the machine on which the gateway is installed. |
port_number | specifies the port number used by the TNS listener. If you have other listeners running on host_name, the value of port_number must be different from the other listeners' port numbers. |
To direct the TNS listener to start the gateway in response to incoming connection requests, add an entry to the listener.ora
file with the following syntax:
SID_LIST_LISTENER= (SID_LIST= (SID_DESC= (SID_NAME=gateway_sid) (ORACLE_HOME=oracle_home_directory) (PROGRAM=tg4sybs) (ENVS=LIBPATH=sybase/sybase_ocs/lib:oracle_home_directory/lib32) ) )
Where:
Variable | Description |
---|---|
gateway_sid | specifies the SID of the gateway and matches the gateway SID specified in the connect descriptor entry in the tnsnames.ora file. |
oracle_home_directory | specifies the Oracle home directory where the gateway resides. |
tg4sybs | specifies the Oracle Transparent Gateway for Sybase |
sybase | specifies the directory referred to in the $SYBASE environment variable (the home of the Sybase software installation). |
sybase_ocs | specifies the directory referred to in the $SYBASE_OCS environment variable (the directory under the home of the Sybase software installation, where the Open Client/Server software, OCS, is installed). |
If you are already running a TNS listener that listens on multiple database SIDs, add only the following syntax to SID_LIST in the existing listener.ora
file:
SID_LIST_LISTENER= (SID_LIST= (SID_DESC=. . ) (SID_DESC=. . ) (SID_DESC= (SID_NAME=gateway_sid) (ORACLE_HOME=oracle_home_directory) (PROGRAM=tg4sybs) (ENVS=LIBPATH=sybase/sybase_ocs/lib:oracle_home_directory/lib32) ) )
See Also:
Oracle Net Services Administrator's Guide for information about changing thelistener.ora
file.The TNS listener must be started to initiate the new settings, as follows:
Set the PATH environment variable to access the commands in the directory $ORACLE_HOME/bin
where the gateway is installed. If you have the Bourne or Korn Shell, enter the following:
$ PATH=$ORACLE_HOME/bin:$PATH;export PATH $ LIBPATH=&ORACLE_HOME/lib:$LIBPATH; export LIBPATH
If you have the C Shell, enter the following:
$ setenv PATH $ORACLE_HOME/bin:$PATH $ setenv LIBPATH &ORACLE_HOME/lib:$LIBPATH
If the listener is already running, use the lsnrctl command to stop the listener and then start it with the new settings, as follows:
$ lsnrctl stop$ lsnrctl start
Check the status of the listener with the new settings, as follows:
$ lsnrctl status
The following is an example of output from a lsnrctl status check:
LSNRCTL for AIX: Version 10.2.0.1 - Production on 01-JUN-2005 09:28:13Copyright (c) 1991, 2004, Oracle. All rights reserved.Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=204.179.99.15)(PORT=1551))STATUS of the LISTENER----------------------Alias listenerVersion TNSLSNR for AIX: Version 10.2.0.1 - ProductionStart Date 28-APRIL-2005 15:38:56Uptime 33 days 17 hr. 49 min. 22 secTrace Level offSecurity OFFSNMP OFFListener Parameter File /users/oracle/gateway/network/admin/listener.oraListener Log File /users/oracle/gateway/network/log/listener.logListening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=204.179.99.15)(PORT=1551)))Services Summary...Service "tg4sybs" has 1 instance(s). Instance "tg4sybs", status UNKNOWN, has 1 handler(s) for this service...The command completed successfully
In this example, tg4sybs is the default SID value assigned during installation. You can use any valid ID for the SID, or keep the default.
Note:
You must use the same SID value in thetnsnames.ora
file, and the listener.ora
file.Before you use the gateway to access Sybase data you must configure the Oracle database server to enable communication with the gateway over Oracle Net Services.
To configure the server you add connect descriptors to the tnsnames.ora
file. You cannot use the Oracle Net Services Assistant or the Oracle Net Services Easy Config tools to configure the tnsnames.ora
file. You must edit the file manually.
See Also:
Oracle Database Administrator's Guide for information about editing thetnsnames.ora
file.For the Oracle database server to access the gateway, it needs a service name entry or a connect descriptor name entry in the tnsnames.ora file to tell the Oracle database server where to make connections. By default, this file is in $ORACLE_HOME/network/admin
, where $ORACLE_HOME is the directory in which the Oracle database server is installed. The tnsnames.ora
file is required by the Oracle database server accessing the gateway, but not by the gateway.
Edit the tnsnames.ora
file to add a connect descriptor for the gateway. The following is an example of the Oracle Net Services entries using TCP/IP protocol needed for the Oracle database server to access the gateway:
connect_descriptor= (DESCRIPTION= (ADDRESS= (PROTOCOL=TCP) (HOST=host_name) (PORT=port_number) ) (CONNECT_DATA= (SID=gateway_sid)) (HS=OK))
Where:
Variable | Description |
---|---|
connect_descriptor | is the description of the object to connect to as specified when creating the database link, such as tg4sybs.
Check the sqlnet.ora file for the following parameter setting: names.directory_path = (TNSNAMES) Note: The sqlnet.ora file is typically stored in $ORACLE_HOME/network/admin. |
TCP | is the TCP protocol used for TCP/IP connections. |
host_name | specifies the machine where the gateway is running. |
port_number | matches the port number used by the Oracle Net Services TNS listener that is listening for the gateway. The TNS listener's port number can be found in the listener.ora file used by the TNS listener. See "Example of Address to Listen On in listener.ora File". |
gateway_sid | specifies the SID of the gateway and matches the SID specified in the listener.ora file of the TNS listener that is listening for the gateway. See "Task 1: Configure Oracle Net Services TNS Listener for the Gateway" for more information. |
(HS=OK) | specifies that this connect descriptor uses the Oracle Heterogeneous Services option. |
Any Oracle client connected to the Oracle database server can access Sybase data through the gateway. The Oracle client and the Oracle database server can reside on different machines. The gateway accepts connections only from the Oracle database server.
A connection to the gateway is established through a database link when it is first used in an Oracle session. In this context, a connection refers to the connection between the Oracle database server and the gateway. The connection remains established until the Oracle session ends. Another session or user can access the same database link and get a distinct connection to the gateway and Sybase database.
Database links are active for the duration of a gateway session. If you want to close a database link during a session, you can do so with the ALTER SESSION statement. The database and application administrators of a distributed database system are responsible for managing the necessary database links that define paths to the Sybase database.
See Also:
Oracle Database Administrator's Guide and Oracle Database Heterogeneous Services Administrator's Guide for more information about using database links.The gateway uses userids and passwords to access the information in the remote database. Some userids and passwords must be defined in the Gateway Initialization File to handle functions such as resource recovery. In the current security conscious environment, having plain-text passwords that are accessible in the Initialization File is deemed insecure. The tg4pwd encryption utility has been added as part of Heterogeneous Services' generic connectivity to help make this more secure. This utility is accessible by this gateway. The initialization parameters which contain sensitive values can be stored in an encrypted form.
See Also:
Oracle Database Heterogeneous Connectivity Administrator's Guide for more information about using this utility.The tasks for configuring the gateway to access multiple Sybase databases are similar to the tasks for configuring the gateway for a single database. The configuration example assumes the following:
The gateway is installed and configured with the default SID of tg4sybs.
The ORACLE_HOME environment variable is set to the directory where the gateway is installed.
The gateway is configured for one Sybase database named db1.
Two Sybase databases named db2 and db3 on a server named syb120_aix are being added.
Configuring the gateway for additional Sybase databases is similar to configuring it for one database, and involves the following:
Configuring the gateway.
Configuring the Sybase environment.
Configuring Oracle Net Services for the gateway and the Oracle database server.
Choose Two System IDs for Each Sybase Database
A separate instance of the gateway accesses the different Sybase databases. Each instance needs its own gateway System ID (SID). For this example, the gateway SIDs are chosen for the instances that access the Sybase databases:
tg4sybs2 for the gateway accessing database db2.
tg4sybs3 for the gateway accessing database db3.
Create Two Initialization Parameter Files
Create an initialization parameter file for each instance of the gateway by copying the original initialization parameter file: $ORACLEHOME/tg4sybs/admin/inittg4sybs.ora
, twice, naming one with the gateway SID for db2 and the other with the gateway SID for db3:
$ cd $ORACLE_HOME/tg4sybs/admin$ cp inittg4sybs.ora inittg4sybs2.ora$ cp inittg4sybs.ora inittg4sybs3.ora
Change the value of the HS_FDS_CONNECT_INFO parameter in the new files.
For init
tg4sybs
2.ora
, enter the following:
HS_FDS_CONNECT_INFO=syb120_aix.db2
For init
tg4sybs
3.ora
, enter the following:
HS_FDS_CONNECT_INFO=syb120_aix.db3
Note:
If you have multiple gateway SIDs for the same Sybase database because you want to use different gateway parameter settings at different times, follow the same procedure. You create several initialization parameter files, each with different SIDs and different parameter settings.Set the Sybase environment variables in both of the new initialization parameter files, as follows:
For inittg4sybs2.ora
, enter the following:
Set SYBASE=sybase
For inittg4sybs3.ora
, enter the following:
Set SYBASE=sybase
Where sybase is the directory referred to in the $SYBASE environment variable (the home of the Sybase software installation).
Add two new entries to the TNS listener configuration file, listener.ora
. You must have an entry for each gateway instance, even when multiple gateway instances access the same database.
The following example shows the entry for the original installed gateway first, followed by the new entries:
SID_LIST_LISTENER= (SID_LIST= (SID_DESC= (SID_NAME=tg4sybs) (ORACLE_HOME=oracle_home_directory) (PROGRAM=tg4sybs) (ENVS=LIBPATH=sybase/sybase_ocs/lib:oracle_home_directory/lib32) ) (SID_DESC= (SID_NAME=tg4sybs2) (ORACLE_HOME=oracle_home_directory) (PROGRAM=tg4sybs) (ENVS=LIBPATH=sybase/sybase_ocs/lib:oracle_home_directory/lib32) ) (SID_DESC= (SID_NAME=tg4sybs3) (ORACLE_HOME=oracle_home_directory) (PROGRAM=tg4sybs) (ENVS=LIBPATH=sybase/sybase_ocs/lib:oracle_home_directory/lib32) ) )
If the listener is already running, use the lsnrctl command to stop the listener and then start it with the new settings, as follows:
$ lsnrctl stop$ lsnrctl start
Add two connect descriptor entries to the tnsnames.ora
file. You must have an entry for each gateway instance, even if the gateway instances access the same database.
The following Sybase example shows the entry for the original installed gateway first, followed by the two entries for the new gateway instances:
old_db_using=(DESCRIPTION= (ADDRESS= (PROTOCOL=TCP) (PORT=1541) (HOST=gtwhost)) (CONNECT_DATA= (SID=tg4sybs)) (HS=OK)) new_db2_using=(DESCRIPTION= (ADDRESS= (PROTOCOL=TCP) (PORT=1541) (HOST=gtwhost)) (CONNECT_DATA= (SID=tg4sybs2)) (HS=OK)) new_db3_using=(DESCRIPTION= (ADDRESS= (PROTOCOL=TCP) (PORT=1541) (HOST=gtwhost)) (CONNECT_DATA= (SID=tg4sybs3)) (HS=OK))
The value for PORT
is the TCP/IP port number of the TNS listener that is listening for the gateway. The number can be found in the listener.ora
file used by the TNS listener. The value for HOST
is the name of the machine on which the gateway is running. The name also can be found in the listener.ora
file used by the TNS listener.
Enter the following to create a database link for the tg4sybs2
gateway:
SQL> CREATE PUBLIC DATABASE LINK SYBS2 CONNECT TO 2 user2 IDENTIFIED BY password2 USING 'new_db2_using';
Enter the following to create a database link for the tg4sybs3
gateway:
SQL> CREATE PUBLIC DATABASE LINK SYBS3 CONNECT TO 2 user3 IDENTIFIED BY password3 USING 'new_db3_using';
Note:
To encrypt the initialization parameters that would normally be stored in the initialization file in plain text, you must use the tg4pwd utility, as described in Oracle Database Heterogeneous Connectivity Administrator's Guide.After the database links are established you can query the new Sybase databases, as in the following:
SQL> SELECT * FROM ALL_USERS@SYBS2;
Or
SQL> SELECT * FROM ALL_USERS@SYBS3;
You can perform the following configuration tasks:
The gateway supports the following transaction capabilities:
COMMIT_CONFIRM
READ_ONLY
SINGLE_SITE
By default, the gateway runs in COMMIT_CONFIRM transaction mode. When the Sybase database is updated by a transaction, the gateway becomes the commit point site. The Oracle database server commits the unit of work in the Sybase database after verifying that all Oracle databases in the transaction have successfully prepared the transaction. Only one gateway can participate in an Oracle two-phase commit transaction as the commit point site.
See Also:
Oracle Database Heterogeneous Connectivity Administrator's Guide for information about the two-phase commit process.To enable the COMMIT_CONFIRM transaction mode, create a recovery account and password and create a log table. The log table, called HS_TRANSACTION_LOG, is where two-phase commit transactions are recorded.
For the gateway to recover distributed transactions, a recovery account and password must be set up in the Sybase database. By default, both the user name of the account and the password are RECOVER
. The name of the account can be changed with the gateway initialization parameter HS_FDS_RECOVERY_ACCOUNT. The account password can be changed with the gateway initialization parameter HS_FDS_RECOVERY_PWD.
Note:
Oracle Corporation recommends that you do not use the default value RECOVER for the user name and password. Moreover, storing plain-text as user name and password in the initialization file is not a good security policy. There is now a utility called tg4pwd, that should be used for encryption. Refer to Chapter 4, 'Encrypting Initialization parameters' in the Heterogeneous Connectivity Administration Guide for further details.Set up a user account in the Sybase database. Both the user name and password must be a valid Sybase user name and password.
In the initialization parameter file, set the following gateway initialization parameters:
HS_FDS_RECOVERY_ACCOUNT to the user name of the Sybase user account you set up for recovery.
HS_FDS_RECOVERY_PWD to the password of the Sybase user account you set up for recovery.
See Also:
"Task 2: Customize the Initialization Parameter File" for information about editing the initialization parameter file. For information about HS_FDS_RECOVERY_ACCOUNT and HS_FDS_RECOVERY_PWD, see Appendix D, "Heterogeneous Services Initialization Parameters".When configuring the gateway for two-phase commit, a table must be created in the Sybase database for logging transactions. The gateway uses the transaction log table to check the status of failed transactions that were started at the Sybase database by the gateway and registered in the table.
Note:
Updates to the transaction log table cannot be part of an Oracle distributed transaction.Note:
The information in the transaction log table is required by the recovery process and must not be altered. The table must be used, accessed, or updated only by the gateway.The table, called HS_TRANSACTION_LOG, consists of two columns, GLOBAL_TRAN_ID, data type CHAR(64) NOT NULL and TRAN_COMMENT, data type CHAR(255).
You can use another name for the log table, other than HS_TRANSACTION_LOG, by specifying the other name using the HS_FDS_TRANSACTION_LOG initialization parameter.
See Also:
Appendix D, "Heterogeneous Services Initialization Parameters" for information about the HS_FDS_TRANSACTION_LOG initialization parameter.Create the transaction log table in the user account you created in "Task 1: Create a Recovery Account and Password". Because the transaction log table is used to record the status of a gateway transaction, the table must reside at the database where the Sybase update takes place. Also, the transaction log table must be created under the owner of the recovery account.
Note:
To utilize the transaction log table, users of the gateway must be granted privileges on the table.To create a transaction log table use the tg4sybs_tx.sql
script, located in the directory $ORACLE_HOME/tg4sybs/admin
where $ORACLE_HOME is the directory under which the gateway is installed. Use isql to execute the script, as follows:
$ isql -Urecovery_account -Precovery_account_password [-Sserver] -itg4sybs_tx.sql
Instead of using the default owner name for the Sybase tables as defined in Sybase, or explicitly specifying a different owner in the SQL statements, you can specify a default owner that is used whenever a name is not explicitly specified in the SQL statements.
To specify the owner, set the gateway initialization parameter HS_FDS_DEFAULT_OWNER in the initialization parameter file.
See Also:
Appendix D, "Heterogeneous Services Initialization Parameters" for information about the HS_FDS_DEFAULT_OWNER initialization parameter.