ALTER MATERIALIZED VIEW

Purpose

A materialized view is a database object that contains the results of a query of one or more tables. Use the ALTER MATERIALIZED VIEW statement to modify an existing materialized view in one or more of the following ways:

• To change its storage characteristics

• To change its refresh method, mode, or time

• To alter its structure so that it is a different type of materialized view

• To enable or disable query rewrite.

  Note: The keyword SNAPSHOT is supported in place of MATERIALIZED VIEW for backward compatibility.

The tables in the query are called master tables (a replication term) or detail tables (a data warehouse term). This reference uses "master tables" for consistency. The databases containing the master tables are called the master databases.

See Also: CREATE MATERIALIZED VIEWfor more information on creating materialized views Oracle8i Replication for information on materialized views in a replication environment Oracle8i Data Warehousing Guide for information on materialized views in a data warehousing environment

Prerequisites

The privileges required to alter a materialized view should be granted directly, as follows:

The materialized view must be in your own schema, or you must have the ALTER ANY MATERIALIZED VIEW system privilege.

To enable a materialized view for query rewrite:

• If all of the master tables in the materialized view are in your schema, you must have the QUERY REWRITE privilege.

• If any of the master tables are in another schema, you must have the GLOBAL QUERY REWRITE privilege.

• If the materialized view is in another user's schema, both you and the owner of that schema must have the appropriate QUERY REWRITE privilege, as described in the preceding two items. In addition, the owner of the materialized view must have SELECT access to any master tables that the materialized view owner does not own.

  See Also: Oracle8i Replication and Oracle8i Data Warehousing Guide

Syntax

LOB_storage_clause: See ALTER TABLE.

modify_LOB_storage_clause: See ALTER TABLE.

partitioning_clauses: See ALTER TABLE.

parallel_clause::=

allocate_extent_clause::=

refresh_clause::=

physical_attributes_clause::=

storage_clause: See the storage_clause.

Keywords and Parameters

schema

Specify the schema containing the materialized view. If you omit schema, Oracle assumes the materialized view is in your own schema.

materialized_view

Specify the name of the materialized view to be altered.

physical_attributes_clause

Specify new values for the PCTFREE, PCTUSED, INITRANS, and MAXTRANS parameters (or, when used in the USING INDEX clause, for the INITRANS and MAXTRANS parameters only) and the storage characteristics for the materialized view.

See Also: ALTER TABLE for information on the PCTFREE, PCTUSED, INITRANS, and MAXTRANS parameters for information about storage characteristics

LOB_storage_clause

The LOB_storage_clause lets you specify the LOB storage characteristics.

See Also: ALTER TABLE for information about specifying the parameters of this clause

modify_LOB_storage_clause

The modify_LOB_storage_clause lets you modify the physical attributes of the LOB attribute lob_item or LOB object attribute.

See Also: ALTER TABLE for information about specifying the parameters of this clause

partitioning_clauses

The syntax and general functioning of the partitioning clauses for materialized views is the same as for partitioned tables.

See Also: ALTER TABLE

Restrictions:

• You cannot use the LOB_storage_clause or modify_LOB_storage_clause when modifying a materialized view.

• If you attempt to drop, truncate, or exchange a materialized view partition, Oracle raises an error.

  Note: If you wish to keep the contents of the materialized view synchronized with those of the master table, Oracle Corporation recommends that you manually perform a complete refresh of all materialized views dependent on the table after dropping or truncating a table partition.

  MODIFY PARTITION UNUSABLE LOCAL INDEXES
  	Use this clause to mark UNUSABLE all the local index partitions associated with partition.
  MODIFY PARTITION REBUILD UNUSABLE LOCAL INDEXES
  	Use this clause to rebuild the unusable local index partitions associated with partition.

parallel_clause

The parallel_clause lets you change the default degree of parallelism for the materialized view.

Note: The syntax of the parallel_clause supersedes syntax appearing in earlier releases of Oracle. Superseded syntax is still supported for backward compatibility, but may result in slightly different behavior.

NOPARALLEL	Specify NOPARALLEL for serial execution. This is the default.
PARALLEL	Specify PARALLEL if you want Oracle to select a degree of parallelism equal to the number of CPUs available on all participating instances times the value of the PARALLEL_THREADS_PER_CPU initialization parameter.
PARALLEL integer	Specification of integer indicates the degree of parallelism, which is the number of parallel threads used in the parallel operation. Each parallel thread may use one or two parallel execution servers. Normally Oracle calculates the optimum degree of parallelism, so it is not necessary for you to specify integer.

LOGGING | NOLOGGING

Specify or change the logging characteristics of the materialized view.

See Also: ALTER TABLE for information about logging characteristics

allocate_extent_clause

The allocate_extent_clause lets you explicitly allocate a new extent for the materialized view.

See Also: ALTER TABLE

CACHE | NOCACHE

For data that will be accessed frequently, CACHE specifies that the blocks retrieved for this table are placed at the most recently used end of the LRU list in the buffer cache when a full table scan is performed. This attribute is useful for small lookup tables. NOCACHE specifies that the blocks are placed at the least recently used end of the LRU list.

See Also: ALTER TABLE for information about specifying CACHE or NOCACHE

USING INDEX

Use this clause to change the value of INITRANS, MAXTRANS, and STORAGE parameters for the index Oracle uses to maintain the materialized view's data.

Restriction: You cannot specify the PCTUSED or PCTFREE parameters in this clause.

refresh_clause

Use the refresh_clause to change the default method and mode and the default times for automatic refreshes. If the contents of a materialized view's master tables are modified, the data in the materialized view must be updated to make the materialized view accurately reflect the data currently in its master table(s). This clause lets you schedule the times and specify the method and mode for Oracle to refresh the materialized view.

Note: This clause only sets the default refresh options. For instructions on actually implementing the refresh, refer to Oracle8i Replication and Oracle8i Data Warehousing Guide.

FAST	Specify FAST for incremental refresh method, which performs the refresh according to the changes that have occurred to the master tables. The changes are stored either in the materialized view log associated with the master table (for conventional DML changes) or in the direct loader log (for direct-load INSERT operations).
	For both conventional DML changes and for direct-path loads, other conditions may restrict the eligibility of a materialized view for fast refresh. See Also: - Oracle8i Replication for restrictions on fast refresh in replication environments - Oracle8i Data Warehousing Guide for restrictions on fast refresh in data warehouse environments
	Restrictions: When you specify FAST refresh at create time, Oracle verifies that the materialized view you are creating is eligible for fast refresh. When you change the refresh method to FAST in an ALTER MATERIALIZED VIEW statement, Oracle does not perform this verification. If the materialized view is not eligible for fast refresh, Oracle will return an error when you attempt to refresh this view. Materialized views are not eligible for fast refresh if the defining query contains an analytic function. See Also: "Analytic Functions"
COMPLETE	Specify COMPLETE for the complete refresh method, which is implemented by executing the materialized view's defining query. If you request a complete refresh, Oracle performs a complete refresh even if a fast refresh is possible.
FORCE	Specify FORCE if, when a refresh occurs, you want Oracle to perform a fast refresh if one is possible or a complete refresh otherwise.
ON COMMIT	Specify ON COMMIT if you want a fast refresh to occur whenever Oracle commits a transaction that operates on a master table of the materialized view. Restriction: This clause is supported only for materialized join views and single-table materialized aggregate views. See Also: Oracle8i Replication and Oracle8i Data Warehousing Guide
ON DEMAND	Specify ON DEMAND if you want the materialized view to be refreshed on demand by calling one of the three DBMS_MVIEW refresh procedures. If you omit both ON COMMIT and ON DEMAND, ON DEMAND is the default. See Also: - Oracle8i Supplied PL/SQL Packages Reference for information on these procedures - Oracle8i Data Warehousing Guide on the types of materialized views you can create by specifying REFRESH ON DEMAND
	Note: If you specify ON COMMIT or ON DEMAND, you cannot also specify START WITH or NEXT.
START WITH	Specify START WITH date to indicate a date for the first automatic refresh time.
NEXT	Specify NEXT to indicate a date expression for calculating the interval between automatic refreshes.
Both the START WITH and NEXT values must evaluate to a time in the future. If you omit the START WITH value, Oracle determines the first automatic refresh time by evaluating the NEXT expression with respect to the creation time of the materialized view. If you specify a START WITH value but omit the NEXT value, Oracle refreshes the materialized view only once. If you omit both the START WITH and NEXT values, or if you omit the refresh_clause entirely, Oracle does not automatically refresh the materialized view.
WITH PRIMARY KEY	Specify WITH PRIMARY KEY to change a rowid materialized view to a primary key materialized view. Primary key materialized views allow materialized view master tables to be reorganized without affecting the materialized view's ability to continue to fast refresh. The master table must contain an enabled primary key constraint. See Also: Oracle8i Replication for detailed information about primary key materialized views
USING ROLLBACK SEGMENT	Specify USING ROLLBACK SEGMENT to change the remote rollback segment to be used during materialized view refresh, where rollback_segment is the name of the rollback segment to be used. See Also: Oracle8i Replication for information on changing the local materialized view rollback segment using the DBMS_REFRESH package
	DEFAULT	Specify DEFAULT if you want Oracle to choose the rollback segment to use. If you specify DEFAULT, you cannot specify rollback_segment.
	MASTER ... rollback_segment	Specify the remote rollback segment to be used at the remote master for the individual materialized view. (To change the local materialized view rollback segment, use the DBMS_REFRESH package, described in Oracle8i Replication.)
		The master rollback segment is stored on a per-materialized-view basis and is validated during materialized view creation and refresh. If the materialized view is complex, the master rollback segment, if specified, is ignored.

QUERY REWRITE

Use this clause to determine whether the materialized view is eligible to be used for query rewrite.

ENABLE	Specify ENABLE to enable the materialized view for query rewrite. See Also: Oracle8i Data Warehousing Guide for more information on query rewrite.
	Restrictions: If the materialized view is in an invalid or unusable state, it is not eligible for query rewrite in spite of the ENABLE mode. You cannot enable query rewrite if the materialized view was created totally or in part from a view. You can enable query rewrite only if all user-defined functions in the materialized view are DETERMINISTIC. See Also: CREATE FUNCTION You can enable query rewrite only if expressions in the statement are repeatable. For example, you cannot include CURRENT_TIME or USER. See Also: Oracle8i Data Warehousing Guide
DISABLE	Specify DISABLE if you do not want the materialized view to be eligible for use by query rewrite. (If a materialized view is in the invalid state, it is not eligible for use by query rewrite, whether or not it is disabled.) However, a disabled materialized view can be refreshed.

COMPILE

Specify COMPILE to explicitly revalidate a materialized view. If an object upon which the materialized view depends is dropped or altered, the materialized view remains accessible, but it is invalid for query rewrite. You can use this clause to explicitly revalidate the materialized view to make it eligible for query rewrite.

If the materialized view fails to revalidate, it cannot be refreshed or used for query rewrite.

CONSIDER FRESH

CONSIDER FRESH directs Oracle to consider the materialized view fresh and therefore eligible for query rewrite in the TRUSTED or STALE_TOLERATED modes. Because Oracle cannot guarantee the freshness of the materialized view, query rewrite in ENFORCED mode is not supported. This clause also sets the staleness state of the materialized view to UNKNOWN. The staleness state is displayed in the STALENESS column of the ALL_MVIEWS, DBA_MVIEWS, and USER_MVIEWS data dictionary views.

This clause is useful after performing partition maintenance operations against the master table. Such operations would otherwise render the materialized view ineligible for fast refresh, and eligible for query rewrite only in STALE_TOLERATED mode.

Note: A materialized view is stale if changes have been made to the contents of any of its master tables. This clause directs Oracle to assume that the materialized view is fresh and that no such changes have been made. Therefore, actual updates to those tables pending refresh are purged with respect to the materialized view.

See Also: Oracle8i Data Warehousing Guide for more information on query rewrite and the implications of performing partition maintenance operations on master tables

Examples

Automatic Refresh Example

The following statement changes the default refresh method for the hq_emp materialized view to FAST:

CREATE MATERIALIZED VIEW hq_emp
   REFRESH COMPLETE
   START WTIH SYSDATE NEXT SYSDATE +1/4096
   AS SELECT * FROM hq_emp;

ALTER MATERIALIZED VIEW hq_emp
   REFRESH FAST; 

The next automatic refresh of the materialized view will be a fast refresh provided it is a simple materialized view and its master table has a materialized view log that was created before the materialized view was created or last refreshed.

Because the REFRESH clause does not specify START WITH or NEXT values, the refresh intervals established by the REFRESH clause when the hq_emp materialized view was created or last altered are still used.

NEXT Example

The following statement stores a new interval between automatic refreshes for the branch_emp materialized view:

ALTER MATERIALIZED VIEW branch_emp
   REFRESH NEXT SYSDATE+7;

Because the REFRESH clause does not specify a START WITH value, the next automatic refresh occurs at the time established by the START WITH and NEXT values specified when the branch_emp materialized view was created or last altered.

At the time of the next automatic refresh, Oracle refreshes the materialized view, evaluates the NEXT expression SYSDATE+7 to determine the next automatic refresh time, and continues to refresh the materialized view automatically once a week.

Because the REFRESH clause does not explicitly specify a refresh method, Oracle continues to use the refresh method specified by the REFRESH clause of the CREATE MATERIALIZED VIEW or most recent ALTER MATERIALIZED VIEW statement.

Complete Refresh Example

The following statement specifies a new refresh method, a new next refresh time, and a new interval between automatic refreshes of the sf_emp materialized view:

ALTER MATERIALIZED VIEW sf_emp
   REFRESH COMPLETE   
   START WITH TRUNC(SYSDATE+1) + 9/24  
   NEXT SYSDATE+7;

The START WITH value establishes the next automatic refresh for the materialized view to be 9:00 a.m. tomorrow. At that point, Oracle performs a complete refresh of the materialized view, evaluates the NEXT expression, and subsequently refreshes the materialized view every week.

Enabling Query Rewrite Example

The following statement enables query rewrite on the materialized view mv1 and implicitly revalidates it.

ALTER MATERIALIZED VIEW mv1
   ENABLE QUERY REWRITE;

Rollback Segment Examples

The following statement changes the remote master rollback segment used during materialized view refresh to master_seg:

ALTER MATERIALIZED VIEW inventory 
   REFRESH USING MASTER ROLLBACK SEGMENT master_seg;  

The following statement changes the remote master rollback segment used during materialized view refresh to one chosen by Oracle:

ALTER MATERIALIZED VIEW sales 
   REFRESH USING DEFAULT MASTER ROLLBACK SEGMENT; 

Primary Key Example

The following statement changes a rowid materialized view to a primary key materialized view:

ALTER MATERIALIZED VIEW emp_rs 
   REFRESH WITH PRIMARY KEY; 

COMPILE Example

The following statement revalidates the materialized view store_mv:

ALTER MATERIALIZED VIEW store_mv COMPILE;

Modifying Refresh Method Example

The following statement changes the refresh method of materialized view store_mv to FAST;

ALTER MATERIALIZED VIEW store_mv REFRESH FAST;

CONSIDER FRESH Example

The following statement instructs Oracle that materialized view mv1 should be considered fresh. This statement allows mv1 to be eligible for query rewrite in TRUSTED mode even after you have performed partition maintenance operations on the master tables of mv1:

ALTER MATERIALIZED VIEW mv1 CONSIDER FRESH;