| Oracle® Database Quick Installation Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B14318-01 |
|
| View PDF |
| Oracle® Database Quick Installation Guide 10g Release 2 (10.2) for Microsoft Windows (32-Bit) Part Number B14318-01 |
|
| View PDF |
Quick Installation Guide
10g Release 2 (10.2) for Microsoft Windows (32-Bit)
B14318-01
August 2005
Oracle Database Quick Installation Guide, 10g Release 2 (10.2) for Microsoft Windows (32-Bit)
B14318-01
Copyright © 2005, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain proprietary information; they are provided under a license agreement containing restrictions on use and disclosure and are also protected by copyright, patent, and other intellectual and industrial property laws. Reverse engineering, disassembly, or decompilation of the Programs, except to the extent required to obtain interoperability with other independently created software or as specified by law, is prohibited.
The information contained in this document is subject to change without notice. If you find any problems in the documentation, please report them to us in writing. This document is not warranted to be error-free. Except as may be expressly permitted in your license agreement for these Programs, no part of these Programs may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose.
If the Programs are delivered to the United States Government or anyone licensing or using the Programs on behalf of the United States Government, the following notice is applicable:
U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the Programs, including documentation and technical data, shall be subject to the licensing restrictions set forth in the applicable Oracle license agreement, and, to the extent applicable, the additional rights set forth in FAR 52.227-19, Commercial Computer Software—Restricted Rights (June 1987). Oracle Corporation, 500 Oracle Parkway, Redwood City, CA 94065.
The Programs are not intended for use in any nuclear, aviation, mass transit, medical, or other inherently dangerous applications. It shall be the licensee's responsibility to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of such applications if the Programs are used for such purposes, and we disclaim liability for any damages caused by such use of the Programs.
Oracle, JD Edwards, PeopleSoft, and Retek are registered trademarks of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
The Programs may provide links to Web sites and access to content, products, and services from third parties. Oracle is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. If you choose to purchase any products or services from a third party, the relationship is directly between you and the third party. Oracle is not responsible for: (a) the quality of third-party products or services; or (b) fulfilling any of the terms of the agreement with the third party, including delivery of products or services and warranty obligations related to purchased products or services. Oracle is not responsible for any loss or damage of any sort that you may incur from dealing with any third party.
This guide describes how to quickly install the Oracle Database Client product on 32-bit Windows systems. It includes information about the following:
This guide describes how to install Oracle Database using the default installation options into a new Oracle home.
Tasks Described in this Guide
The procedures in this guide describe how to:
Configure your system to support Oracle Database.
Install the Oracle Database software on a local file system.
Configure a general-purpose Oracle database that uses the local file system for database file storage.
Install software from the Oracle Database Companion CD, which improves the performance of Oracle Database on your system.
Results of a Successful Installation
After you successfully install Oracle Database:
The database that you created and the default Oracle Net listener process are running on the system.
Oracle Enterprise Manager Database Control and iSQL*Plus are running and can be accessed using a Web browser.
A single-node version of the Oracle Cluster Synchronization Services (CSS) daemon is running and is configured to start automatically when your system boots.
Tasks Not Described in this Guide
This guide does not describe how to complete the following tasks:
Installing the software on a system that has an existing Oracle software installation.
Installing Oracle Clusterware and Oracle Real Application Clusters (RAC).
Installing Automatic Storage Management (ASM)
Cloning an Oracle home
Enabling Enterprise Manager e-mail notifications or automated backups.
Using alternative storage options such as Automatic Storage Management (ASM) or raw devices for database storage.
Where to Get Additional Installation Information
For more detailed information about installing Oracle Database components, including information about the tasks not described in this guide, see one of the following guides:
If you are installing the software on a single system or if you want to install Automatic Storage Management (ASM), see Oracle Database Installation Guide for Microsoft Windows (32-Bit).
If you are installing Oracle Real Application Clusters (RAC), see Oracle Real Application Clusters Installation and Configuration Guide for your platform.
This guide also describes how to install Oracle Clusterware, which is a prerequisite for RAC installations.You can use Oracle Clusterware with single-instance Oracle Database installations as well.
Both of these guides are available on the Oracle Database installation media. To access them, use a Web browser to open the welcome.htm file in the database directory of the DVD, then select the Documentation tab.
For more information about installing Oracle Database Companion CD components, see one of the following guides:
Oracle Database Companion CD Installation Guide for Microsoft Windows (32-Bit)
Oracle Database Companion CD Quick Installation Guide for Microsoft Windows (32-Bit)
These guides are available in the companion directory on the Oracle Database installation media.
Log on as a member of the Administrators group to the computer on which to install Oracle components. If you are installing on a Primary Domain Controller (PDC) or a Backup Domain Controller (BDC), log on as a member of the Domain Administrators group.
The following hardware components are required for Oracle Database:
Table 1 Hardware Requirements
| Requirement | Minimum Value |
|---|---|
|
Physical memory (RAM) |
256 MB minimum, 512 MB recommended |
|
Virtual memory |
Double the amount of RAM |
|
Disk space |
Basic Installation Type total: 2.04 GB Advanced Installation Types total: 1.94 GB See Table 2 for details. |
|
Video adapter |
256 colors |
|
Processor |
550 MHz minimum |
Table 2 lists the space requirements for NTFS. The starter database requires 1.03 GB of disk space. The figures in this table include the starter database. FAT32 space requirements are slightly larger.
Table 2 Disk Space Requirements for NTFS
| Installation Type | TEMP Space | C:\Program Files\Oracle | Oracle Home | Datafiles * | Total |
|---|---|---|---|---|---|
|
Basic Installation |
125 MB |
3.1 MB |
905 MB |
1.03 GB |
2.04 GB |
|
Advanced Installation: Enterprise Edition |
125 MB |
3.1 MB |
905 MB ** |
950 MB ** |
1.94 GB ** |
|
Advanced Installation: Standard Edition |
125 MB |
3.1 MB |
905 MB ** |
950 MB ** |
1.94 GB ** |
|
Advanced Installation: Personal Edition |
125 MB |
3.1 MB |
905 MB ** |
950 MB ** |
1.94 GB ** |
* Refers to the contents of the admin, flash_recovery_area, and oradata directories in the ORACLE_BASE directory.
** This size can be higher depending on the installation options selected, such as languages or additional components. If you choose to install Oracle Database with automated backups enabled, include at least 2 GB extra for datafile disk space.
See Also:
"About NTFS File System and Windows Registry Permissions" in Oracle Database Platform Guide for Microsoft Windows (32-Bit)To ensure that the system meets these requirements, follow these steps:
Determine the physical RAM size. For a computer using Windows 2003, for example, open System in the Windows Control Panel and select the General tab. If the size of the physical RAM installed in the system is less than the required size, then you must install more memory before continuing.
Determine the size of the configured virtual memory (also known as paging file size). For a computer using Windows 2003, for example, open System in the Control Panel, select the Advanced tab, and click Settings in the Performance section. Then select the Advanced tab. The virtual memory is listed in the Virtual Memory section.
If necessary, see your operating system documentation for information about how to configure additional virtual memory.
Determine the amount of free disk space on the system. For a computer using Windows 2003, for example, open My Computer, right-click the drive where the Oracle software is to be installed, and choose Properties.
Determine the amount of disk space available in the temp directory. This is equivalent to the total amount of free disk space, minus what will be needed for the Oracle software to be installed.
If there is less than 125 MB of disk space available in the temp directory, then first delete all unnecessary files. If the temp disk space is still less than 125 MB, then set the TEMP or TMP environment variable to point to a different hard drive. For a computer using Windows 2003, for example, open System in the Control Panel, select the Advanced tab, and click Environment Variables.
Table 3 lists the software requirements for Oracle Database.
Table 3 Software Requirements
| Requirement | Value |
|---|---|
|
System Architecture |
Processor: Intel (x86), AMD64, and Intel EM64T Note: Oracle provides 32-bit (x86), 64-bit (Itanium), and 64-bit (x64) versions of Oracle Database for Windows. The 32-bit database version, which this installation guide describes, runs on the 32-bit version of Windows on either x86 or x64 hardware. Oracle provides limited certification for 32-bit Oracle Database on 64-bit Windows (x64). For additional information, visit OracleMetaLink at: http://metalink.oracle.com |
|
Operating System |
Oracle Database for Windows is supported on the following operating systems:
Windows NT is not supported. Windows Multilingual User Interface Pack is supported on Windows Server 2003 and Windows XP Professional. |
|
Compiler |
Pro*Cobol has been tested and certified with the following two compilers:
Object Oriented COBOL (OOCOBOL) specifications are not supported. The following components are supported with the Microsoft Visual C++ .NET 2002 7.0 and Microsoft Visual C++ .NET 2003 7.1 compilers:
Note: If you plan to use GNU Compiler Collection as your primary compiler, see "Configuring GNU Compiler Collection as the Primary Compiler" in Oracle Database Installation Guide for Microsoft Windows (32-Bit) for configuration instructions. |
|
Network Protocol |
The Oracle Net foundation layer uses Oracle protocol support to communicate with the following industry-standard network protocols:
|
To install the Oracle Database software:
If you are installing Oracle Database on a multihomed computer or a computer that uses multiple aliases, use the System in the Control Panel to create the ORACLE_HOSTNAME system environment variable. Set this variable to point to the host name of the computer on which you are installing Oracle Database.
Insert Oracle Database installation media and navigate to the database directory. Alternatively, navigate to the directory where you downloaded or copied the installation files.
Use the same installation media to install Oracle Database on all supported Windows platforms.
Double-click setup.exe to start Oracle Universal Installer.
In the Welcome window, select either Basic Installation or Advanced Installation, and then answer the prompts as needed.
See Also:
Chapter 1 in Oracle Database Installation Guide for Microsoft Windows (32-Bit) for more information on the Basic and Advanced installation methodsThe subsequent windows that appear, which are listed in Table 4, depend on the installation method you have chosen. The order in which the windows appear depends on the options you select.
Follow these guidelines to complete the installation:
Do not install Oracle Database 10g release 2 (10.2) software into an existing Oracle home that contains Oracle9i or earlier software.
If you install Oracle Database 10g release 2 (10.2) in an Oracle home directory that already contains Oracle Database 10g release 2 (10.2) client software, the listener is not created. To create the listener, install and run Oracle Net Configuration Assistant after the installation. If the Administrator client is installed before Oracle Database, Oracle Net Configuration Assistant is already installed.
Follow the instructions displayed in the Oracle Universal Installer windows. If you need additional information, click Help.
When prompted for a password, follow these guidelines:
Make the password be between 4 and 30 characters long.
Use the database character set for the password's characters, which can include the underscore (_), dollar ($), and pound sign (#) characters.
Do not start passwords with a numeral.
Do not use a user name for a password.
Do no use Oracle reserved words for the password.
Do not use change_on_install for the SYS account password.
Do not use manager for the SYSTEM account password.
Do not use sysman for the SYSMAN account password.
Do not use dbsnmp for the DBSNMP account password.
If you choose to use the same password for all the accounts, do not use change_on_install, manager, sysman, or dbsnmp as a password.
Have the password include at least 1 alphabetic, 1 numeric, and 1 punctuation mark character
Do not use simple or obvious words, such as welcome, account, database, and user for the password.
Note:
You must remember the passwords that you specify.Do not modify the Java Runtime Environment (JRE) except by using a patch provided by Oracle Support Services. Oracle Universal Installer automatically installs the Oracle-supplied version of the JRE. This version is required to run Oracle Universal Installer and several Oracle assistants.
If you encounter errors while installing or linking the software, see Appendix G in Oracle Database Installation Guide for Microsoft Windows (32-Bit) for information about troubleshooting.
If you chose an installation type that runs Database Configuration Assistant and Oracle Net Configuration Assistant in interactive mode, you must provide detailed information about configuring your database and network.
If you need assistance when using the Database Configuration Assistant or Oracle Net Configuration Assistant in interactive mode, click Help on any window.
Note:
If you chose a default installation, Database Configuration Assistant and Oracle Net Configuration Assistant run non-interactively.When the configuration tools finish, click Exit, then click Yes to exit from Oracle Universal Installer.
When Oracle Enterprise Manager Database Control opens a Web browser, enter the username and password you created during the installation.
You can log in as SYS, SYSTEM, or SYSMAN. If you log in as SYS, then you must connect AS SYSDBA. Enter the password you specified for the account during installation.
Optionally, delete the OraInstalldate_time directory if you want to remove the temporary files that were created during the installation process. The OraInstalldate_time directory holds about 45 MB of files. This directory is created in the location set by the TEMP environment variable setting.
Restarting your computer also removes the OraInstalldate_time directory.
See Chapter 4 in Oracle Database Installation Guide for Microsoft Windows (32-Bit) for information about postinstallation tasks that you must complete after you have installed Oracle Database.
Table 4 Oracle Universal Installer Screens
| Screen | Recommended Action |
|---|---|
|
Select Installation Method |
Select one of the following, then click Next:
|
|
Select Installation Type |
Select Enterprise Edition, Standard Edition, Personal Edition, or Custom. Click Next. |
|
Specify Home Details |
In the Destination section, accept the default values or enter the Oracle home name and directory path in which to install Oracle components. The directory path should not contain spaces. Click Next. |
|
Available Product Components |
If you selected Custom for the Installation Type, this window appears. Select from the list and click Next. To learn more about each component, position the mouse over the component's name. |
|
Product-specific Prerequisite Checks |
This window checks that your system meets the minimum requirements for the installation. Click Next. |
|
Upgrade an Existing Database |
If you have a previous updatable version of Oracle Database or Automatic Storage Management installed, this window appears. For in-place database installations where Automatic Storage Management is running, ASM is upgraded automatically. Click Yes if you want to upgrade or No if not. If you click Yes, the Summary window appears next. For more information on upgrades, refer to Oracle Database Upgrade Guide. |
|
Select Configuration Option |
Select one of the following:
|
|
Select ASM Management Option |
If you selected Configure Automatic Storage Management (ASM) from the Select Configuration Option window, and if you have Oracle Enterprise Manager 10g Grid Control installed, this window appears. Select Yes or No, depending on if you want to use Grid Control to manage Automatic Storage Management. If you select Yes, then select from the list of Enterprise Management agents to use. |
|
Configure Automatic Storage Management |
Appears if you selected Configure Automatic Storage Management (ASM) from the Select Configuration Option window. Enter the disk group name. The disk group list shows both candidate and member disks; you can click Show Candidates or Show All to filter their display. Then select the disk group's redundancy level and its member disks. For Redundancy Level, choose one of the following. The default is normal redundancy.
|
|
Select Database Configuration |
Select the database configuration that best meets your needs: General Purpose, Transaction Processing, Data Warehouse; Advanced. See the online help provided by either Oracle Universal Installer or Database Configuration Assistant for a description of these preconfigured database types. Click Next. |
The Oracle Database Companion CD contains products that improve the performance of or complement Oracle Database. For most installations, Oracle recommends that you install Oracle Database 10g Products from the Companion CD.
See Also:
Oracle Database Companion CD Installation Guide for Microsoft Windows (32-Bit)
Oracle Database Companion CD Quick Installation Guide for Microsoft Windows (32-Bit)
To become familiar with this release of Oracle Database, Oracle suggests that you complete the following tasks:
Log in to Oracle Enterprise Manager Database Control using a Web browser.
Oracle Enterprise Manager Database Control is a Web-based application that you can use to manage a single Oracle database. The default URL for Database Control is:
http://host.domain:port/em/
Log in with the user name SYSMAN. Use the password that you specified for this user during the Oracle Database installation.
See Chapter 4 of Oracle Database Installation Guide for Microsoft Windows (32-Bit) for information about required and optional postinstallation tasks, depending on the components that you want to use.
Review Chapter 5 of Oracle Database Installation Guide for Microsoft Windows (32-Bit) for information about how to get started using Oracle Database.
Read Oracle Database 2 Day DBAOracle Database 2 Day DBA guide, to learn more about using Oracle Enterprise Manager Database Control to administer a database.
This guide, designed for new Oracle DBAs, describes how to use Oracle Enterprise Manager Database Control to manage all aspects of an Oracle database installation. It also provides information about how to enable e-mail notifications and automated backups, which you might not have configured during the installation.
This section contains information about the following:
Product Licenses
You are welcome to install and evaluate the products included in this media pack for 30 days under the terms of the Trial License Agreement. However, you must purchase a program license if you want to continue using any product after the 30 day evaluation period. See the following section for information about purchasing program licenses.
See Also:
Oracle Database Licensing InformationPurchasing Licenses, Version Updates, and Documentation
You can purchase program licenses, updated versions of Oracle products, and printed versions of Oracle documentation from the Oracle Store Web site:
http://oraclestore.oracle.com/
Contacting Oracle Support Services
If you have purchased Oracle Product Support, you can call Oracle Support Services for assistance 24 hours a day, seven days a week. For information about purchasing Oracle Product Support or contacting Oracle Support Services, go to the Oracle Support Services Web site:
http://www.oracle.com/support/
Locating Product Documentation
Documentation for Oracle products is available in both HTML and Adobe portable document format (PDF) formats from several locations:
On disks in the media pack:
Platform-specific documentation is available on the installation media. To access the documentation, see the welcome.htm file located in the top-level directory of the DVD.
Generic product documentation is available on the Oracle Documentation Library on the DVD.
From the Oracle Technology Network Web site:
http://www.oracle.com/technology/documentation/
To view PDF documents, download the free Adobe Acrobat Reader from the Adobe Web site, if necessary:
http://www.adobe.com/
Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at
http://www.oracle.com/accessibility/
Accessibility of Code Examples in Documentation
Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.
Accessibility of Links to External Web Sites in Documentation
This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.
TTY Access to Oracle Support Services
Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week. For TTY support, call 800.446.2398.
This document includes the following sections:
Accessibility Instructions - Delete This Section After Reading
TTY Access to Oracle Support Services
Documentation Accessibility
