Oracle® OLAP DML Reference 10g Release 2 (10.2) Part Number B14346-02 |
|
|
View PDF |
When you finish writing the statements in a model, you can use COMPILE to compile the model. During compilation, COMPILE checks for format errors, so you can use COMPILE to help debug your code before running a model. When you do not use COMPILE before you run the model, then the model is compiled automatically before it is solved.You can use the OBJ function with the ISCOMPILED choice to test whether a model is compiled.
SHOW OBJ(ISCOMPILED 'myModel')
When you compile a model, either by using a COMPILE statement or by running the model, the model compiler checks for problems that are unique to models. You receive an error message when any of the following occurs:
The model contains any statements other than DIMENSION (in models), INCLUDE, and assignment (SET) statements.
The model contains both a DIMENSION statement and an INCLUDE statement.
A DIMENSION or INCLUDE statement is placed after the first equation in the model.
The dimension values in a single dimension-based equation refer to two or more different dimensions.
An equation refers to a name that the compiler cannot identify as an object in any attached analytic workspace. When this error occurs, it may be because an equation refers to the value of a dimension, but you have neglected to include the dimension in a DIMENSION statement. In addition, a DIMENSION statement may appear to be missing when you are compiling a model that includes another model and the other model fails to compile. When a root model (the innermost model in a hierarchy of included models) fails to compile, the parent model is unable to inherit any DIMENSION commands from the root model. In this case the compiler may report an error in the parent model when the source of the error is actually in the root model. See INCLUDE for additional information.
The model compiler examines each name in an equation to determine the analytic workspace object to which the name refers. Since you can use a variable and a dimension value in exactly the same way in a model equation (basing calculations on it or assigning results to it), a name might be the name of a variable or it might be a value of any dimension listed in a DIMENSION (in models) statement.
To resolve each name reference, the compiler searches through the dimensions listed in explicit or inherited DIMENSION statements, in the order they are listed, to determine whether the name matches a dimension value of a listed dimension. The search concludes as soon as a match is found.
Therefore, when two or more listed dimensions have a dimension value with the same name, the compiler assumes that the value belongs to the dimension named earliest in a DIMENSION statement.
Similarly, the model compiler might misinterpret the dimension to which a literal INTEGER
value belongs. For example, the model compiler will assume that the literal value '200'
belongs to the first dimension that contains either a value at position 200 or the literal dimension value 200.
To avoid an incorrect identification, you can specify the desired dimension and enclose the value in parentheses and single quotes. See "Formatting Ambiguous Dimension Values".
When the compiler finds that a name is not a value of any dimension specified in a DIMENSION statement, it assumes that the name is the name of an analytic workspace variable. When a variable with that name is not defined in any attached analytic workspace, an error occurs.
The model compiler determines the dimensions over which the statements will loop. When an equation assigns results to a variable, the compiler constructs code that loops over the dimensions (or bases of a composite) of the variable.
When you run a model that contains dimension-based equations, the solution variable that you specify can be dimensioned by more dimensions than are listed in DIMENSION (in models) statements.
When you specify the value of a model dimension as an argument to a user-defined program, the compiler recognizes a dependence introduced by this argument.
For example, an equation might use a program named weight
that tests for certain conditions and then weights and returns the Taxes
line item based on those conditions. In this example, a model equation might look like the following one.
Net.Income = Opr.Income - weight(Taxes)
The compiler correctly recognizes that Net.Income
depends on Opr.Income
and Taxes
. However, when the weight
program refers to any dimension values or variables that are not specified as program arguments, the compiler does not detect any hidden dependencies introduced by these calculations.
The model compiler analyzes dependencies between the equations in the model. A dependence exists when the expression on the right-hand side of the equal sign in one equation refers to the assignment target of another equation. When an equation indirectly depends on itself as the result of the dependencies among equations, a cyclic dependence exists between the equations.
The model compiler structures the model into blocks and orders the equations within blocks and the blocks themselves to reflect dependencies. When you run the model, it is solved one block at a time. The model compiler can produce three types of solution blocks:
Simple Solution Blocks—Simple blocks include equations that are independent of each other and equations that have dependencies on each other that are non-cyclic.
For example, when a block contains equations that solve for values A
, B
, and C
, a non-cyclic dependence can be illustrated as A>B>C
. The arrows indicate that A
depends on B
, and B
depends on C
.
Step Solution Blocks—Step blocks include equations that have a cyclic dependence that is a one-way dimensional dependence. A dimensional dependence occurs when the data for the current dimension value depends on data from previous or later dimension values. The dimensional dependence is one-way when the data depends on previous values only or later values only, but not both. For more information on one-way dimensional dependence, see "Ensuring One-Way Dimensional Dependence".
Dimensional dependence typically occurs over a time dimension. For example, it is common for a line item value to depend on the value of the same line item or a different line item in a previous time period. When a block contains equations that solve for values A
and B
, a one-way dimensional dependence can be illustrated as A>B>LAG(A)
. The arrows indicate that A
depends on B
, and B
depends on the value of A
from a previous time period.
Simultaneous Solution Blocks—Simultaneous blocks include equations that have a cyclic dependence that is other than one-way dimensional. The cyclic dependence may involve no dimensional qualifiers at all, or it may be a two-way dimensional dependence. For more information on two-way dimensional dependence, see "Structures for Which the Model Compiler Assumes Two-Way Dimensional Dependence".
When a model contains a block of simultaneous equations, COMPILE gives you a warning message. In this case, you may want to check the settings of the options that control simultaneous solutions before you run the model. Table A-7, "Model Options" lists these options.
An example of a cyclic dependence that does not depend on any dimensional qualifiers can be illustrated as A>B>C>A
. The arrows indicate that A
depends on B
, B
depends on C
, and C
depends on A
.
An example of a cyclic dependence that is a two-way dimensional dependence can be illustrated as A>LEAD(B)>LAG(A)
. The arrows indicate that A
depends on the value of B
from a future period, while B
depends on the value of A
from a previous period.
The solution of a simultaneous block of equations is sensitive to the order of the equations. In general, you should rely on the model compiler to determine the optimal order for the equations. In some cases, however, you may be able to encourage convergence by placing the equations in a particular order.
To force the compiler to leave the simultaneous equations in each block in the order in which you place them, set the MODINPUTORDER option to YES
before compiling the model. (MODINPUTORDER has no effect on the order of equations in simple blocks or step blocks.)
When dependence is introduced through any of the following structures, the model compiler assumes that two-way dimensional dependence occurs:
A two-way dimensional dependence can occur when you use an aggregation function, such as AVERAGE, TOTAL, ANY, or COUNT.
Opr.Income = Gross.Margin - (TOTAL(Marketing + Selling + R.D)) Marketing = LAG(Opr.Income, 1, month)
A two-way dimensional dependence can occur when you use a time-series function that requires a time-period argument, such as CUMSUM, LAG, or LEAD (except for the specific functions and conditions described in "Ensuring One-Way Dimensional Dependence").
A two-way dimensional dependence also can occur when you use a financial function, such as DEPRSL or NPV.
A cyclic dependence across a time dimension that you introduce through a loan or depreciation function may cause unexpected results. The loan functions include FINTSCHED, FPMTSCHED, VINTSCHED, and VPMTSCHED. The depreciation functions include DEPRDECL, DEPRDECLSW, DEPRSL, and DEPRSOYD.
When dependence between equations is introduced through any of the following structures, a one-way dimensional dependence occurs:
A one-way dimensional dependence occurs when you use a LAG or LEAD function and when the argument for the number of time periods is coded as an explicit number (either as a value or a constant) or as the result of ABS. (Otherwise, there may be a two-way dependence, involving both previous and future dimension values, and the compiler assumes that a simultaneous solution is required.) The following example illustrates this use of LAG.
Opr.Income = Gross.Margin - (Marketing + Selling + R.D) Marketing = LAG(Opr.Income, 1, month)
A one-way dimensional dependence occurs when you use a MOVINGAVERAGE, MOVINGMAX, MOVINGMIN, or MOVINGTOTAL function, when that the start and stop arguments are nonzero numbers, and when both the start and top arguments are positive or both are negative. (Otherwise, two-way dimensional dependence is assumed.)
Opr.Income = Gross.Margin - (Marketing + Selling + R.D) Marketing = MOVINGAVERAGE(Opr.Income, -4, -1, 1, month)
After compiling a model, you can use the following tools to obtain information about the results of the analysis performed by the compiler:
The MODEL.COMPRPT program produces a report that shows how model equations are grouped into blocks. For step blocks and for simultaneous blocks with a cross-dimensional dependence, the report lists the dimensions involved in the dependence.
The MODEL.DEPRT program produces a report that lists the variables and dimension values on which each model equation depends. When a dependence is dimensional, the report gives the name of the dimension.
The INFO function lets you obtain specific items of information about the structure of the model.
The compiler does not analyze the contents of any programs or formulas that are used in model equations. Therefore, you must check the programs and formulas yourself to make sure they do not do any of the following:
Refer to the value of any variable used in the model.
Refer to the solution variable.
Limit any of the dimensions used in the model.
Invoke other models.
When a model or program violates any of these restrictions, the results of the model may be incorrect.